C4 Fabrication 4Runner Overland Series Rear Bumper / 5th Gen / 2010+

C4 Fabrication 4Runner Overland Series Rear Bumper / 5th Gen / 2010+

Name: C4 Fabrication 4Runner Overland Series Rear Bumper / 5th Gen / 2010+
Brand: C4 Fabrication
SKU: 1100-4110-NS
Price: 2499.0 USD
Availability: InStock

By C4 Fabrication

$2,499.00

Swing Arm Options

Quantity

Warranty Information

C4 FAB LLC will warranty all products produced and distributed by C4 FAB LLC for ONE YEAR after the shipping date of the product. This warranty will include any issues caused by manufacture defects including failing or broken welds and/or failing or broken hardware and mechanical parts that are shipped with the product. C4 FAB LLC DOES NOT WARRANTY POWDER COAT FINISH ON ANY PRODUCTS THAT ARE SHIPPED POWDER COATED OR CAN BE ORDERED WITH THE OPTION TO BE POWDER COATED. Products will only be warrantied if installed in accordance with C4 FAB LLC installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of C4 FAB LLC to determine warranty eligibility. Our One Year Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.

C4 FAB LLC reserves the right to remedy defects in workmanship or materials in one of three ways.

C4 FAB LLC will issue replacements components to the customer that deems defective or inconsistent with the quality of its brand.
C4 FAB LLC will elect to issue the customer a full or partial refund for the defects or damages of the product.
C4 FAB LLC will pay the cost of having a shop near the customer perform repairs on the product if it is deemed that this option is more affordable and will satisfy the customers warranty request.

This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. C4 FAB LLC is not responsible for defects that are not in control of C4 FAB LLC such as, trail damage, highway damage or car accidents, overloading, incorrect assembly, poor maintenance practices or damaging acts of god such as extreme weather e.g.: hail, flooding, lightning, extreme wind.

REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY C4 FAB LLC) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.

SKU: 1100-4110-NS

More details

Description

SHIPS WITHIN 8 WEEKS.

The C4 4Runner Overland Series Rear Bumper is a full replacement, no cut design for your 2010+ 4Runner. Includes a license plate mount kit with light, all necessary hardware, and retains the camera functionality. Every swing out comes with a camp table, holes for CB antennas, and zip tie tabs for easy routing of wires.

All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.

Bolt-on receiver hitch that maintains factory tow capacity. (hitch not DOT weight rated)
When bolt on hitch is removed this is the highest clearance available of any rear bumper for 5th gen 4runner.
Multiple mounting hole patterns on swing outs allow for various accessory mounting configurations.
Swing out latching systems are easy to use, heavy duty and greatly minimize swing arm shake compared to other brands on the market.
Main bumper structure designed with extra bracing inside to greatly reduce bumper twist and sag when swing out’s are open.
Swing out’s fit up to 35″ tire.
Bumper mounting system allows bumper to adjust in every direction so the perfect fit and finish can be achieved.
Light weight steel filler piece attaches to the body of the vehicle below the tail light. This piece allows for a tight fit around the tail light and an even reveal along the bumper lines to prevent unsightly gaps.
Compatible with C4 Summit hatch ladder and the GOBI ladder(not Trd Pro version).
NOT compatible with 2021+ BSM
NOT compatible with parking sensors on some models
Base bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.
Made from various thicknesses of steel to reduce weight as much as possible while maintaining a very strong bumper.
SHIPS BARE STEEL, C4 does not offer powder coating services. Bumper will need to be painted or powder coated before installation to prevent rust.

Notes:

On Half Swing Bumper:Tire mount must be removed to bolt on other accessories.
Single (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.
Maxtrax brand mounting pins recommended / RotoPax brand mount not included & required to use with our mount.
Our Rotopax/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.
All of our mounts can be adjusted vertically on our swing arms according to preference.